There is a simple rule with rotating machinery, build it big and massive compared to the load on it. Such is not possible in windmill applications. Keep the rotating machines well lubed, and they will last a while. That proves very impractical on top of a tall tower. Accordingly, without adequate mass, without adequate maintenance, and without adequate lubrication, what goes around, stops, especially in marine environments.

Windmills do not work, and they will never work. Just can’t.

How much pain will we take before we wise up?

Watts Up With That?

Story by Eric Worrall –

wind_turbine_bearings[1]A few years ago, I used to know a senior wind turbine engineer. One evening, over a few beers, he told me the dirty secret of his profession:

“The problem is the bearings. If we make the bearings bigger, the bearings last longer, but making the bearings larger increases friction, which kills turbine efficiency. But we can’t keep using the current bearings – replacing them is sending us broke. What we need is a quantum leap in bearing technology – bearing materials which are at least ten times tougher than current materials.”

At the time there was very little corroborating online material available to support this intriguing comment – but evidence seems to be accumulating that bearings are a serious problem for the wind industry.

Siemens citing bearing failures as part of the reason for a substantial fall in profit;
http://www.offshorewind.biz/2014/05/07/siemens-energy-division-profit-down-54-pct/

In the announcement of…

View original post 189 more words